System information

Manufacturer: Dell Inc.                
Product Name: Dimension 5000               

Serial Number: xxxx
UUID: xxx-xxx-xxx-xxx-xxx

INFO: Run `dmidecode -t system` to see further information.

Base board information
Manufacturer: Dell Inc.          
Product Name: xxxx

Version:    
Serial Number: xxxx

INFO: Run `dmidecode -t baseboard` to see further information.

CD/DVD-ROM:
acd0: CDRW <HL-DT-ST RW/DVD GCC-4481B/E106> at ata0-master UDMA33

Floppy disk:
fd0: <1440-KB 3.5" drive> on fdc0 drive 0

Graphic card information:
vendor='Nvidia Corp'
device='GeForce 7600 GT'
INFO: Check pciconf(8) for more information.

PCI devices with no driver attached:
none0@pci0:0:31:3:	class=0x0c0500 card=0x01991028 chip=0x266a8086 rev=0x03 hdr=0x00

BIOS information

Vendor: Dell Inc.                
Version: A01
Release Date: 11/30/2004

Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 512 kB

INFO: Run `dmidecode -t bios` to see further information.

CPU information

Machine class:	i386
CPU Model:	Intel(R) Pentium(R) 4 CPU 3.00GHz
No. of Cores:	2
Cores per CPU:	

CPU Features:
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>

Interrupt statistics:
interrupt                          total       rate
irq1: atkbd0                          96          0
irq6: fdc0                            10          0
irq14: ata0                       142245          7
irq16: nvidia0                   1093342         61
irq19: bfe0                       980798         55
irq20: atapci1                     40206          2
irq21: uhci0 ehci0                205022         11
irq22: uhci1                       19592          1
irq23: pcm0 uhci3                     25          0
cpu0: timer                     35633700       1999
cpu1: timer                     35633807       1999
Total                           73748843       4139

CPU usage statistics:
CPU:  1.1% user,  0.0% nice,  0.4% system,  0.2% interrupt, 98.3% idle

Number of processor slots on main board: 1
Voltage: 1.4 V
External Clock: 800 MHz
Max Speed: 4000 MHz
Current Speed: 3000 MHz
Upgrade: ZIF Socket

INFO: Run `dmidecode -t processor` to see further information.

RAM information

System memory information
Maximum Capacity: 1 GB
Number Of Devices: 4

INFO: Run `dmidecode -t memory` to see further information.

System memory information
Wired memory	- disabled for paging out	130 MB
Active memory	- recently referenced		255 MB
Inactive memory	- recently not referenced	664 MB
Cached memory	- almost avail. for allocation	1 MB
Free memory	- fully avail. for allocation	936 MB

System memory summary
Total real memory available:	2026 MB
Logically used memory:		422 MB
Logically available memory:	1603 MB

Swap information
Device          1K-blocks     Used    Avail Capacity
/dev/ad4s3b       4157440       0B     4.0G     0%

Operating system information

Operating system release:	FreeBSD 7.2-RC2
OS architecture:		i386
Hostname:			a380.xxxxxxx.ch
Kernel build dir location:	/usr/obj/usr/src/sys/GENERIC
Currently booted kernel:	/boot/kernel/kernel
Kernel release:			702000
Kernel scheduler used:		ULE
Kernel secure level:		-1
Jailed system			No

Currently loaded kernel modules (kldstat(8)):
snd_ich.ko
sound.ko
nvidia.ko
acpi.ko
ipfw.ko
WARNING: The sound.ko module is loaded, however it is not being loaded upon the system boot time from /boot/loader.conf.
WARNING: The acpi.ko module is loaded, however it is not being loaded upon the system boot time from /boot/loader.conf.
WARNING: The ipfw.ko module is loaded, however it is not being loaded upon the system boot time from /boot/loader.conf.

INFO: For security recommendations see the security(7) man page.
INFO: For system tuning advice, see the tuning(7) man page.
INFO: To view various system statistics use the systat(1) tool.

Bootloader settings
The /boot/loader.conf has the following contents:
autoboot_delay="20"
graphics_enable="YES"
beastie_theme="/boot/themes/default/theme.conf"
nvidia_load="YES"
snd_ich_load="YES"
INFO: See the loader.conf(5) manual page for more information.

System uptime:
System is booted since Thu Apr 30 08:52:50 2009
 1:49PM  up  4:57, 8 users, load averages: 0.01, 0.13, 0.11

Process statistics:
139 processes: 2 running, 137 sleeping

Storage information

Available hard drives:
ad4: 76293MB <Seagate ST380013AS 8.12> at ata2-master SATA150

Raid controllers:

Currently mounted filesystems:
/dev/ad4s3a on / (ufs, local)
devfs on /dev (devfs, local)
/dev/ad4s3d on /tmp (ufs, local, soft-updates)
/dev/ad4s3f on /usr (ufs, local, soft-updates)
/dev/ad4s3e on /var (ufs, local, soft-updates)


I/O statistics:
      tty             ad4             cpu
 tin tout  KB/t tps  MB/s  us ni sy in id
  95  179 22.86   2  0.05   4  0  1  0 95
INFO: Run iostat(8) or gstat(8) to see live statistics.

Disk usage:
Filesystem     Size    Used   Avail Capacity  Mounted on
/dev/ad4s3a    989M    290M    620M    32%    /
devfs          1.0K    1.0K      0B   100%    /dev
/dev/ad4s3d    496M     12M    444M     3%    /tmp
/dev/ad4s3f     28G     13G     13G    50%    /usr
/dev/ad4s3e    2.9G    740M    1.9G    27%    /var

Network information

hostname: a380.xxxxxxxx.ch

Currently available network devices:
bfe0 plip0 lo0

Basic configuration for currently available NICs:

bfe0: (a380.xxxxxx.ch.)

bfe0 is configured via DHCP
MAC address: 
00:11:43:xx:xxxx:
IPv4 addresses:
xxx.xxx.2.127 netmask 0xffffff00 broadcast xxx.xxx.2.255

Hardware related information
vendor='Broadcom Corporation'
device='BCM4401 10/100 Integrated Ethernet Controller'
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active

Network statistics
Name    Mtu Network       Address              Ipkts Ierrs     Ibytes    Opkts Oerrs     Obytes  Coll
bfe0   1500 <Link#1>      00:11:43:xx:xx:xx   477761     0  423853013   508186     0  328199580     0
bfe0   1500 xxx.xxx.2.0   a380                471935     -  416702592   507736     -  321073072     -

lo0: (localhost.)
IPv4 addresses:
127.0.0.1 netmask 0xff000000  
IPv6 addresses:
fe80::1%lo0 prefixlen 64
::1 prefixlen 128

Hardware related information

Network statistics
Name    Mtu Network       Address              Ipkts Ierrs     Ibytes    Opkts Oerrs     Obytes  Coll
lo0   16384 <Link#3>                              97     0       4080       97     0       4080     0
lo0   16384 fe80:3::1     fe80:3::1                0     -          0        0     -          0     -
lo0   16384 localhost     ::1                      0     -          0        0     -          0     -
lo0   16384 your-net      localhost               14     -        760       14     -        760     -

INFO: Check ifconfig(8) for more information.

Default route:
xxx.xxx.2.1 via bfe0
INFO: For a complete routing table please run netstat -rn.

Firewall related information:
WARNING: inetd(8) is enabled, however none of its services are enabled. Check /etc/inetd.conf.
There are 15 rules in /etc/hosts.allow (-rw-r--r--) which affect inetd(8) operation and services linked against libwrap.
INFO: Check the hosts_options(5) manual page for more information.

IPFIREWALL (IPFW) is enabled.
Firewall type is set to workstation.
00100     28      1520 allow ip from any to any via lo0
00200      0         0 deny ip from any to 127.0.0.0/8
00300      0         0 deny ip from 127.0.0.0/8 to any
00400      0         0 check-state
00500    307     18472 allow tcp from me to any established
00600 976364 737467728 allow tcp from me to any setup keep-state
00700   2696    272513 allow udp from me to any keep-state
00800      0         0 allow icmp from me to any keep-state
00900      0         0 allow udp from 0.0.0.0 68 to 255.255.255.255 dst-port 67 out
01000      0         0 allow udp from any 67 to me dst-port 68 in
01100     16      5506 allow udp from any 67 to 255.255.255.255 dst-port 68 in
01200      0         0 allow icmp from any to any icmptypes 8
01300      0         0 allow icmp from any to any icmptypes 3,4,11
01400      0         0 allow tcp from xxx.xxx.2.0/24 to me dst-port 22
65000   2730    309299 count ip from any to any
65100   2507    289936 deny { tcp or udp } from any to any dst-port 135-139,445 in
65200      0         0 deny { tcp or udp } from any to any dst-port 1026,1027 in
65300      0         0 deny { tcp or udp } from any to any dst-port 1433,1434 in
65400     29      9875 deny ip from any to 255.255.255.255
65500      0         0 deny ip from any to 224.0.0.0/24 in
65500      0         0 deny udp from any to any dst-port 520 in
65500    193      9436 deny tcp from any 80,443 to any dst-port 1024-65535 in
65500      1        52 deny ip from any to any
65535      0         0 deny ip from any to any
Firewall logging is enabled.
INFO: Check the /etc/rc.firewall (-rw-r--r--) file for its configuration.
INFO: More information about IPFW can be found at http://www.freebsd.org/doc/en/books/handbook/firewalls-ipfw.html.

Resolver name servers:
xxx.xx.2.13

Socket statistics:
There are currently 8 listening (6 TCP/2 UDP) and 5 connected connections.

Processes listening for incomming connections:
Xorg *:6000
sendmail 127.0.0.1:25
sshd *:22
syslogd *:514
INFO: For more information please see sockstat(8) manual.

Network buffer statistics
130/770/900 mbufs in use (current/cache/total)
128/402/530/25600 mbuf clusters in use (current/cache/total/max)
128/384 mbuf+clusters out of packet secondary zone in use (current/cache)
0/54/54/12800 4k (page size) jumbo clusters in use (current/cache/total/max)
0/0/0/6400 9k jumbo clusters in use (current/cache/total/max)
0/0/0/3200 16k jumbo clusters in use (current/cache/total/max)
288K/1212K/1501K bytes allocated to network (current/cache/total)
0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters)
0/0/0 requests for jumbo clusters denied (4k/9k/16k)
0/6/6656 sfbufs in use (current/peak/max)
0 requests for sfbufs denied
0 requests for sfbufs delayed
0 requests for I/O initiated by sendfile
0 calls to protocol drain routines
INFO: See the netstat(1) manual for more information.

User related information

There are 2 local users (uid > 1000) and 25 system users (uid < 1000).

There are 3 local groups (gid > 1000) and 32 system groups (gid < 1000).

Users in wheel group (allowed to use su(1)):
root,beat

Currently logged-in users:
beat             p5       :0.0              9:23AM     - w -hi
beat             p4       :0.0              9:22AM    12 ssh xxxxx.chruetertee.ch
beat             pa       :0.0             10:05AM  1:43 ssh xxxx
beat             p8       :0.0              9:39AM  1:43 ssh xxxx
beat             p7       :0.0              9:35AM  1:47 ssh xxxx
beat             p9       :0.0              9:54AM  1:56 ssh xxxx
beat             p6       :0.0              9:29AM  2:02 ssh xxxx
beat             p3       :0.0              8:56AM  4:16 ssh xxxx

Top 10 logged-in users this month:
beat              2382.83
root                24.30

Last login dates per user:
root              ttyv3                       Mon Apr 20 08:42:24 2009
beat              :0                          Thu Apr 30 08:53:15 2009

Packages information

There are 461 packages installed in the system and 98 of them needs updating.
Note that this number may be inaccurate, as your ports tree may be outdated too.

INFO: Run pkg_info(1) to see a full list of installed packages.
INFO: Use pkg_version(1) to inspect what packages are outdated.
INFO: Use the portsnap(8) or csup(1) tool to update your ports tree.

Packages with known security vulnerabilities:
0 problem(s) in your installed packages found.

Information related to services

Running services

cron is running as pid 841.
  841  ??  Is     0:00.04 /usr/sbin/cron -s

dbus is running as pid 794.
  794  ??  Is     0:00.11 /usr/local/bin/dbus-daemon --system

devd is running as pid 576.
  576  ??  Is     0:00.08 /sbin/devd
root stream /var/run/devd.pipe

hald is running as pid 896.
  896  ??  Ss     0:04.59 /usr/local/sbin/hald
haldaemonhald /var/run/hald/dbus-xLKnx9Ygt5 
haldaemonhald /var/run/hald/dbus-xeDYhePapE 

sendmail_clientmqueue is running as pid 835.
  835  ??  Is     0:00.01 sendmail: Queue runner@00:30:00 for /var/spool/clientmqueue (sendmail)

sendmail_submit is running as pid 831.
  831  ??  Ss     0:00.30 sendmail: accepting connections (sendmail)
root tcp4 127.0.0.1:25

sshd is running as pid 825.
  825  ??  Is     0:00.07 /usr/sbin/sshd
root tcp6 *:22
root tcp4 *:22

syslogd is running as pid 666.
  666  ??  Is     0:00.11 /usr/sbin/syslogd -s
root dgram /var/run/log
root dgram /var/run/logpriv
root udp6 *:514
root udp4 *:514


Not running services

cupsd is not running.
gkrellmd is not running.
mdnsd is not running.
mysql is not running.
slpd is not running.
svnserve is not running.
uuidd is not running.
wpa_supplicant is not running.

INFO: Configuration of system-wide services is located in the /etc/ directory.
INFO: Configuration of 3rd party services can be found in the /usr/local/etc/ directory.

Misc information

Open file statistics (cur/max):
632/12328 files

Resource limits:
Resource limits (current):
  cputime          infinity secs
  filesize         infinity kB
  datasize           524288 kB
  stacksize           65536 kB
  coredumpsize     infinity kB
  memoryuse        infinity kB
  memorylocked     infinity kB
  maxprocesses         5547
  openfiles           11095
  sbsize           infinity bytes
  vmemoryuse       infinity kB

Information related to cron:
There are 7 entries in /etc/crontab

Current time and date:
Thu Apr 30 13:49:59 CEST 2009